Your cassette is one of the key parts of your bike’s drivetrain, which propels you—the rider—forward. And because of that, your cassette takes a lot of abuse, which means you’ll need to replace your cassette every so often in order to keep your drivetrain running smoothly.

High-mileage riders might replace their cassette after every season, while lower-mileage riders might replace it every few years. It can also depend on how well you take care of your bike, and specifically your chain; a grimy, gritty chain or an old, stretched-out chain can wear down a cassette faster.

One way to tell if you need to change a bike cassette is by looking at the teeth on the cogs to see if they’re worn down. Detecting early or moderate wear will take a trained eye, but severe wear will be pretty noticeable, especially when compared to the teeth on a new cog. A tooth on a newer cog will be flat on top, while a very worn tooth will be rather pointy.

If you’re also experiencing skipping while pedaling (and your rear derailleur and shifter cable are in good shape), especially with a newer chain, then it’s likely time to replace your cassette.

With the right tools in hand, replacing a bike cassette is a straightforward and easy task. Below, we cover what you need to get the job done and how to do it.

What You’ll Need

Chain whip tool: Alternatively, you can use cassette pliers.

Lockring tool: These come in several sizes, so make sure to get one that’s compatible. Some are complete with a handle, and some come with a guide pin to help secure it in place as you go to remove it.

how to change a bike cassette
Tools you’ll need are are a lockring tool (bottom) and a chain whip (top).
Trevor Raab

Adjustable wrench: If needed, based on lockring tool type.

New cassette: To keep it easy, simply pick up a new version of your current cassette.

New chain: Chains and cassettes wear down together. You’ll want to run a fresh chain on your new cassette. If you need help installing a new chain, we’ve got you covered, too. Check out our tutorial here.

PRO TIP: You could use this as an opportunity to get a different cassette—maybe you’d like a better setup for climbing, with a bigger cog—but it will require some legwork. Before hitting that buy button or walking out of your favorite shop, you need to figure out which alternative cassettes will work with your rear derailleur, so check with the manufacturer’s specifications. Make sure your cassette is from the same manufacturer as that of your derailleur. Also, your new length of chain will need to correspond with the size and range of cogs on the new cassette and may not match the length of your old chain.

[Want to fly up hills? Climb! gives you the workouts and mental strategies to conquer your nearest peak.]

How to Change a Bike Cassette

First, remove your rear wheel from the bike. Next, remove the quick release skewer from the wheel. Attach the chain whip tool (or cassette pliers if you’re using those) to one of the cogs.

Place the lockring tool onto the lockring at the end. If the tool doesn’t have a handle, use a wrench. Using the chain whip tool to hold the cassette in place, turn the lockring tool counterclockwise to unscrew and remove the lockring. Now you can remove the old cassette.

Grab your new cassette. Note the spline positions on the freehub and install each cog, along with any spacers, so that they align with the corresponding splines and with the inscribed side facing out (showing the tooth count).

Once the new cassette is fully in place, reinstall the lockring using the lockring tool; it’s a good idea here to apply some grease to the threading. Reinstall the skewer, then install your rear wheel onto your bike, and test out the new cassette.

For more help on replacing a cassette, check out our video below which outlines the same process (with the goal of removing a plastic “pie plate” spoke protector).

preview for Tech Tips: How to Remove a Pie Plate
Headshot of Jessica Coulon
Jessica Coulon
Service and News Editor

When she’s not out riding her mountain bike, Jessica is an editor for Popular Mechanics. She was previously an editor for Bicycling magazine.